CuInS2/SiNWs/Si composite material for application as potential photoelectrode for photoelectrochemical hydrogen generation

This work aims at developing a new composite material based on nanosized semiconducting CuInS₂ (CIS) particles combined with silicon nanowires grown on a silicon substrate (SiNWs/Si) for photoelectrochemical (PEC)-splitting of water. The CIS particles were prepared via a colloidal method using N-methylimidazole (NMI) as the solvent and an annealing treatment. The SiNWs were obtained by chemical etching of silicon (100) substrates assisted by a metal. The CIS/SiNWs/Si composite material was obtained by deposition of an aliquot of a suspension of CIS particles onto the SiNWs/Si substrate, using spin coating followed by a drying step. The XRD pattern demonstrated that CuInS₂ grows in the tetragonal/chalcopyrite phase, while SiNWs/Si presents a cubic structure. The SEM images show semi-spherical particles (～10 nm) distributed on the surface of silicon nanowires (～10 μm). The EIS measurements reveal n-type conductivity for CIS, SiNWs/Si and CIS/SiNWs/Si materials, which could favour the oxidation reaction of water molecules.     

Computational continua for linear elastic heterogeneous solids on unstructured finite element meshes

The computational continua framework, which is a variant of higher‐order computational homogenization theories that is free of scale separation, does not require higher‐order finite element continuity, and is free of higher‐order boundary conditions, has been generalized to unstructured meshes. The salient features of the proposed generalization are (i) a nonlocal quadrature scheme for distorted elements that accounts for unit cell distortion in the parent element domain and (ii) an approximate variant of the nonlocal quadrature that eliminates the cost of computing positions of the quadrature points in the preprocessing stage. The performance of the computational continua framework on unstructured meshes has been compared to the first‐order homogenization theory and the direct numerical simulation.     

Core–shell type multi‐arm azide polymers based on hyperbranched copolyether as potential energetic materials in solid propellants

A series of novel multi‐arm azide copolymers (POGs) with the same hyperbranched poly[3‐ethyl‐3‐(hydroxymethyl)oxetane] core (PEHO‐c) and different content of linear glycidyl azide polymer shell (GAP‐s) have been synthesized by sequential cationic ring‐opening polymerization and azidation. Detailed structural information of these copolyethers was deduced from Fourier transform infrared, ¹H NMR and inverse gated decoupled ¹³C NMR spectroscopies, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry, gel permeation chromatography and elemental analysis. The molecular weight of POG having GAP‐s and PEHO‐c with a molar ratio 14.95:1 (R_s/c) was around 31 000 g mol^?1, far above that of linear GAP (around 4000 g mol^?1). The apparent viscosity and glass transition temperature (?51 to ?23 °C) decreased first and then slightly increased with increasing molecular weight. Thermal analysis revealed that all the obtained POGs exhibited excellent resistance to thermal decomposition up to 220 °C. Moreover, the energetic properties, investigated using oxygen bomb calorimetric measurements, indicated that the enthalpy of formation of the POGs was higher than that of general linear GAP, but similar to that of branched GAP under reasonable R_s/c. The compatibilities of the POGs with common materials used in solid propellants were studied using differential scanning calorimetry and the results indicated that the POGs had good compatibility with these materials. © 2017 Society of Chemical Industry     

Morphology,mechanical properties and electromagnetic shielding effectiveness of poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene)/carbon nanotube nanocomposites: effects of maleic anhydride,carbon nanotube loading and processing method

Nanocomposites based on poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene) (SEBS) and carbon nanotubes (CNTs) (SEBS/CNT) as well as SEBS grafted with maleic anhydride (SEBS‐MA)/CNT were successfully prepared for electromagnetic shielding applications. Both SEBS/CNT and SEBS‐MA/CNT nanocomposites were prepared by melt compounding and were post‐processed using two different techniques: tape extrusion and compression moulding. The different nanocomposites were characterized by Raman spectroscopy and rheological analysis. Their mechanical properties, electrical properties (10^-2–10⁵ Hz) and electromagnetic shielding effectiveness (8.2–12.4 GHz) were also evaluated. The results showed that the CNT loading amount, the presence of MA in the matrix and the shaping technique used strongly influence the final morphologies and properties of the nanocomposites. Whilst the nanocomposite containing 8 wt% CNTs prepared by compression moulding presented the highest electromagnetic shielding effectiveness (with a value of 56.73 dB, which corresponds to an attenuation of 99.9996% of the incident radiation), the nanocomposite containing 5 wt% CNTs prepared by tape extrusion presented the best balance between electromagnetic and mechanical properties and was a good candidate to be used as an efficient flexible electromagnetic interference shielding material. © 2018 Society of Chemical Industry     

A polyvinyl alcohol-based mixed matrix membrane with uniformly distributed Schiff base network-1 for ethanol dehydration

In this study, Schiff base network (SNW)-1 nanoparticles with high hydrophilicity and large specific surface area were used to prepare polyvinyl alcohol (PVA)-based mixed matrix membranes (MMMs), which were evaluated for ethanol dehydration. Because of the low difference of density between SNW-1 and PVA, the as-prepared nanoparticles can be uniformly distributed into the PVA active layer. The effects of SNW-1 loading, feed temperature, and water concentration on pervaporation (PV) performance were further studied. The results showed the MMM with 10 wt% of SNW-1 loading exhibited a separation factor of 1,501 and a permeation flux of 187 g m⁻² h⁻¹ for feeding 95 wt% ethanol/water binary solution at 75°C. Overall, the SNW-1/PVA MMMs showed great prospect in ethanol dehydration via PV.     

Influence of sintering temperature on ion dynamics of Na0.5Bi0.5TiO3-δ: Suitability as an electrolyte material for SOFC

Sodium bismuth titanate samples with different morphology were synthesized via varying the sintering temperature from 1000 to 1150 °C. The conductivity was significantly affected with the morphology of the system. The dynamics of ions was understood from the conductivity spectra. The dc conductivity, hopping frequency and exponent values were extracted from the conductivity spectra analysis. The impedance and modulus spectroscopy along with exponent behaviour suggested short range hopping for the sample sintered at 1000 °C and followed Ghosh scaling instead of Summerfield scaling. While long-range hopping was observed for the samples sintered at 1150 °C and it followed both the Summerfield scaling and Ghosh scaling. Moreover, the stability of the sample is checked in reducing atmosphere.     

Preparation of YSZ porous ceramics with precise porosity control

Conventional preparation of porous ceramics often hard to accurately control the porosity of the samples. In this paper, by improving the foaming method, the foaming process is placed in the limited space of the ball mill tank, and YSZ porous ceramics with different porosity are obtained by changing the amount of slurry. Initial results showed that the porosity of the sample varies linearly with the increasing of addition of slurry. From the microscopic morphology, it can be seen that the increase in slurry content will reduce the number of pore with little changed size, which lead to the decrease in porosity. Therefore, with simple calculation YSZ porous ceramics with 85%, 80%, 75%, 70%, and 65% porosity can be obtained using the method of foaming in limited space by ball milling.     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

Fe-Cr-Ni系不锈钢在热老化和退火过程中铁素体调幅分解的相场法研究

用基于Cahn-Hilliard方程的相场法研究了Fe-Cr-Ni系不锈钢中的铁素体在热老化和后续退火过程中调幅分解的演化过程，结果表明：在热老化过程中调幅分解生成相连的网络状α'相，调幅分解引起的Cr成分波动的波长和振幅都随着热老化时间的延长而增大；在随后的退火过程中α'相逐渐溶解而Cr成分波动的振幅迅速减小，但是波长继续增大。还讨论了热老化时的调幅分解对铁素体纳米压痕硬度的影响以及退火温度对调幅分解回复(α'相溶解)所需时间的影响，结果表明：铁素体的纳米压痕硬度主要与调幅分解的振幅有关，且随着振幅的增大而提高。同时，提高退火温度能显著缩短调幅分解回复所需的时间，退火回复时间与退火温度之间有Arrhenius形式的关系。